Buscar por:
[Ingresar | Registrar]
Carro de Compras
Su carro esta vacio.
0Productos en el Carro:
Productos: 169
Categorias: 4
Precios: US Dollars
Ubicacion: /Switch

20-AMP A10 Rocker Switch - Ivory

20-AMP A10 Rocker Switch - Ivory

Informacion del Producto


  • Compatible with all X10 transmitters, timers and software systems
  • Great for high-wattage lighting, pool equipment or any other non-dimming loads
  • Status LED allows you to see if a device is on or not
  • Ivory

Essential Info

Looking for a way to automate high-wattage devices controlled by a switch? Simply replace the existing wall switch with these A10 Relay Rocker Switches. Built with a mechanical Form A relay instead of the triac found on most dimmers, these switches can handle loads of 20 amps at 120V. They're ideal for direct or automated control of high-wattage incandescent lighting, pool equipment, air conditioners, fluorescent lights and more. These A10 Relay Rocker Switches are designed for high-power use and capable of handling loads of 20A. Requires neutral wire connection.


What's Included

  • A10 Relay Rocker Switch - Ivory RS114I
  • More Info

    These switches work with the commonly-used X10/PLC signals, as well as the proprietary A10 protocol. This makes them ideal for remote or timed control with any X10 transmitter, intelligent controller or X10-based home automation software. Switches respond to "All Lights On," "All Units On," and "All Lights Off." They're even capable of two-way powerline communication, including the ability to report status upon a status request from an intelligent controller.

    Capable of a Virtual 3-Way Switch
    Because these switches can be controlled from another location from another switch with the same address, they're ideal for creating a virtual 3-way switch. It's ideal for anyone that wants to control a set of lights from more than one location, without having to hire an electrician to run an additional wire between the two switches. Each switch's address can be set via easy, push-button configuring.

    Status LED
    A status LED verifies power to the unit and indicates status and power. The LED can be set to be "ON" (direct acting) or "OFF" (reverse acting) when load is off.

    Note: Because these switches respond to ALL LIGHTS ON, use care when controlling non-lamp loads. Use an X10 appliance module or wall receptacle if you don't want your device to respond to that command.



    ACT Product No.: RS114I
    Maximum Switch Current: 20 Amps
    Maximum Switching Power: 2400VA
    Maximum Switching Voltage: 132VAC
    Internal Form A Relay: Enclosed, flying lead connections
    Dimensions: 4.2" x 2.44" x 1.6" (fits in 2" x 4" electrical box)
    Operating Temperature: 32°F to 120°F
    Connections: Line (black), Load (blue), Neutral (white), Ground (green)
    Color: Ivory

    Precio: $99.99

    Codigo del Producto: 2270AI
    Producto Especial
    Productos Popular
    Lista de Correo
    Suscribir a nuestra Lista de Correo:
    Powered by CubeCart
    Copyright Devellion Limited 2006. All rights reserved.

    Warning: Unknown: write failed: Disk quota exceeded (122) in Unknown on line 0

    Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct () in Unknown on line 0