Buscar por:
Bienvenido
[Ingresar | Registrar]
Carro de Compras
Su carro esta vacio.
0Productos en el Carro:
$0.00Total:
 
Informacion
Productos: 169
Categorias: 4
Precios: US Dollars
 
Moneda
 
Idioma
 
Ubicacion: /Switch

Z-Wave Master Wall Controller w/Clock

Z-Wave Master Wall Controller w/Clock

Informacion del Producto

Overview

  • Menu driven setup of scenes and events
  • Features 6 "Quick" pre-set scene activator buttons
  • Allows control of up to 100 individual pre-set scenes containing any number of Z-wave enabled devices

Essential Info

The Z-Wave Master Wall Controller with Clock is an enhanced radio frequency controller compatible with all Z-Wave-enabled networks and devices. Its features include multiple scene functions, programming based on time, action, or a combination of both, along with a full two-way control system. There is a built-in Astro clock, allowing lights to go on at sunset and off at sunrise, never having to reset the timer. The Z-Wave Master Wall Controller allows you to create a Z-Wave system based on a menu-driven user interface. Rooms, devices, scenes, and events can be defined and initiated by time, action, or a combination of time & action.

Manuals/Software

What's Included

  • Z-Wave Master Wall Controller
  • Mounting materials
  • Instructions
  • More Info

    Automate Your Entire Home with Z-Wave Technology
    Any device displaying the Z-Wave logo can be incorporated in your Z-Wave network. Since Z-Wave operates on RF frequencies and every device is a repeater, the more devices you use, the better your network works. There is a wide variety of Z-Wave devices made by several manufacturers, and any of these can add more automatic functions to your network. Each line-powered node in a Z-Wave network is designed to act as a repeater, forming a mesh network, eliminating radio "dead spots" and providing a high level of reliability.

    Requires a 3-gang junction box for mounting.
    Must be used in conjunction with the Z-Wave Hand-Held Remote Controller

    Features
  • Menu driven setup of scenes and events
  • Built-in astronomic timing with real-time-clock backup
  • Multiple location On/Off & Raise/Lower control when used with Z-Wave enabled switches and dimmers
  • Allows control of up to 100 individual pre-set scenes containing any number of Z-Wave enabled devices
  • Features 6 "Quick" pre-set scene activator buttons
  • Features individual scene status feedback for enhanced control
  • Separate focus and control buttons allows the user to custom mix scene selections and vary light levels
  • Home key provides for quick de-selection of scenes and back-out from menu programming

  • Specifications

    Specifications

    Manufacturer: Intermatic
    Manufacturer Product No.: CA7100
    UPC: 078275096165
    Dimensions: 7 1/2" x 5 1/2" x 1"
    Maximum Network Size: 232 Z-Wave nodes
    Frequency: 908.42MHz
    Range: 50' indoor, 100' outdoor
    Data Rate: 9600 bits/second
    Operating Temperature Range: 32°F to 104°F (0°C to 40°C)
    Power: 120VAC, 50/60Hz 4 watts
    Approvals: FCC, CSA c/us
    Warranty: 10 years, limited

    Precio: $560.00


    Codigo del Producto: 119311
     
    Producto Especial
     
    Productos Popular
     
    Lista de Correo
    Suscribir a nuestra Lista de Correo:
    Email:
     
    Powered by CubeCart
    Copyright Devellion Limited 2006. All rights reserved.

    Warning: Unknown: write failed: Disk quota exceeded (122) in Unknown on line 0

    Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct () in Unknown on line 0